SANIFORT granules

FAST DISSOLVING GRANULES FOR DISINFECTION OF WATER IN SWIMMING POOLS

SPECTER OF ACTIVITY:

Bactericidal, virucidal, mycobactericidal (incl.Tbc.), sporicidal, algicidal and fungicidal action.

EN 13697, EN 1276, EN 1650, EN 14348, EN 14476, EN 14347

CONTENT

Each 100 g Sanifort granules contain:

99 g sodium dichlorisocyanurate dihydrate (active chlorine 53 -56g)

DESCRIPTION

Sanifort (granules) is a chlorine based preparation intended for:

–           Hyper chlorination during/after the initial filling of the swimming pool

–           Maintaining disinfection of the water and control of algae in the swimming pool

Its disinfecting effect is thanks to the release of active chlorine, causing irreversible damage and extermination of the pathogenic microorganisms. The free chlorine level in the water, necessary for the germicidal action of the preparation, is achieved instantaneously.

RECOMMENDATIONS FOR USE

For the preparing of the working solutions, see “Instructions for use”. Use the measuring spoon, supplied with the packing, to measure the necessary quantity of the preparation. Spread the measured granules directly on the water surface, where they will dissolve completely within 5 – 10 minutes. Check the level of free available chlorine daily. Add additional quantity Sanifort (granules) if the result shows chlorine content below 0.2 mg/l.

FOR PROFESSIONAL AND MASS USE

PACKAGE SIZE:

500 g

SDS

Instruction for use